The effects of pterygomaxillary disjunction in surgically assisted rapid maxillary expansion: A systematic review and meta-analysis.

OBJECTIVE: This study aims to assess the expansive effects of pterygomaxillary disjunction (PMD) in surgically assisted rapid maxillary expansion (SARME) surgery using a meta-analysis approach. MATERIALS AND METHODS: The study conducted a comprehensive literature search across five databases: PubMed, Scopus, Medline, Embase, and Cochrane, adhering to the PRISMA 2020 guidelines. Dental alterations were assessed using either cone-beam computed tomography (CBCT) or dental casts, while skeletal changes were exclusively measured from CBCT scans. We analysed the dentoskeletal changes between PMD +/- groups and conducted a within-group comparison. The primary focus of the results was on the mean differences observed in pre- and post-operative measurements. RESULTS: Dental expansion was larger in the PMD+ group but not statistically significant. Skeletal expansion showed a significantly larger expansion in the posterior region in the PMD+ group (P = .033). Without PMD, anterior palatal expansion was significantly larger (P = .03), and the buccal tipping of posterior teeth was also significantly larger (P = .011) to achieve acceptable dental expansion outcomes. CONCLUSIONS: Both PMD +/- groups of SARME surgery can achieve satisfactory dental expansion outcomes. However, bone expansion and tooth inclination are also important factors that influence orthodontic treatment and post-expansion stability. By reducing the bony resistance with PMD, larger posterior palatal expansion and more parallel bony expansion are observed. In contrast, without PMD, there is smaller palatal expansion and greater tooth inclination in the posterior region. This could potentially lead to compromised periodontal conditions following expansion.

Clinical Insights Into Addressing Constricted Maxillary Arch in Angle's Class II Malocclusion: A Case Report.

The transverse dimension, often overlooked in orthodontics, plays a crucial role in malocclusions, affecting not only occlusion in that dimension but also sagittal and vertical dimensions. Posterior crossbites, indicative of transverse maxillary issues, are commonly addressed through palatal expansion. This case report explores the clinical insights into addressing a constricted maxillary arch in Angle's Class II malocclusion using a nickel-titanium (NiTi) expander. The NiTi expander provides constant and optimal expansion forces by incorporating a temperature-activated NiTi alloy. A 16-year-old male with irregularly placed teeth, high palatal vault, and posterior crossbite underwent treatment involving NiTi expander usage for maxillary expansion. The case presentation details the patient's journey, starting with upper arch bonding and expansion, then lower arch bonding, and concluding with complete leveling and alignment without extractions. The presented case demonstrates successful correction of a constricted maxillary arch, specifically in the canine and molar regions, utilizing the NiTi expander. The observed increase in intermolar width aligns with previous studies, showcasing the effectiveness of slow maxillary expansion. This article contributes valuable clinical insights into addressing transverse maxillary issues, emphasizing the importance of careful consideration in choosing the appropriate expansion method for optimal results.

Can different osteotomies have an influence on surgically assisted rapid maxillary expansion? A systematic review.

The purpose of this study was to systematically review the randomized and non-randomized clinical trials (RCT; nRCT) concerning the different available osteotomies for surgically assisted rapid maxillary expansion (SARME): pterygomaxillary disjunction (SARME + PD vs SARME-PD) and segmental Le Fort I osteotomy (2-piece vs 3-piece). Outcomes focused on skeletal, dental, upper airway changes, complications, and relapse. Two authors investigated five databases (PubMed, Cochrane Library, Google Scholar, Scopus, Web of Science) until August 2023. The Cochrane Collaboration Tool and the Newcastle-Ottawa scale were used for the quality assessment of the included RCTs and nRCTs, respectively. A total of 554 articles were retrieved and after duplicates removing and full-text reading, 40 studies were included. Two RCTs showed a low risk of bias, one an unclear risk and one a high risk. Among the non-RCTs, 15 studies showed a good quality, while 21 exhibited a fair quality score. SARME + PD resulted in more homogeneous posterior bone expansion, with minimal dental effects. No difference between 2-piece and 3-piece in asymmetric expansion was observed, although 3SO showed 1-2 mm of more transverse increase. The oropharynx minimum cross-sectional area, the nasopharynx and the oropharynx volume were greater in SARME + PD. Both dental and bone relapse can occur but no differences between the groups were observed. All osteotomies guaranteed a correction of transverse maxillary deficiency. Lower side effects were described in SARME + PD. Two-piece and 3-piece segmental Le Fort I osteotomies did not show any differences in the symmetry and amount of expansion.

Does Miniscrew-Assisted Rapid Palatal Expansion Influence Upper Airway in Adult Patients? A Scoping Review.

(1) Objective: This scoping review evaluates the effects of miniscrew-assisted rapid palatal expansion (MARPE) on different regions of the upper airway in adult patients and investigates various methods of measurement. (2) Methods: The search encompassed Pubmed, Cochrane Library, Scopus and Web of Science. This review was conducted following the PRISMA_ScR guidelines, and the inclusion criteria for examined studies were chosen in accordance with the PICOS framework. (3) Results: Seven studies were included in this review, comprising four retrospective studies, one prospective and two case reports. All studies involved the use of Cone Beam Computed Tomography (CBCT) for measurements of the areas of interest. The percentage of increase in the volume of the nasal cavity varied between 31% and 9.9%, depending on the study. Volumetric variations in the nasopharynx were reported as increases between T0 (before expansion) and T1 (immediately after expansion) of 6.4%, 20.7% and 14.1%. All studies considered T0 before expansion and T1 immediately after expansion. Only one study evaluated remote follow-up to assess if the results were maintained after one year. (4) Conclusions: MARPE appears to lead to a statistically significant increase in the upper airway, especially in the nasal cavity and nasopharynx immediately after expansion. However, further prospective and retrospective trails with long-term controls are required to verify the effects of MARPE on the upper airway.

Photographic analysis of orofacial soft tissue alterations related to rapid maxillary expansion in pediatric patients.

Maxillary transverse deficiency is widely recognized as one of the most common skeletal issues in orthodontics, and rapid maxillary expansion (RME) is commonly employed as a treatment method. This study aimed to investigate the impact of RME on the soft tissues of the orofacial region in pediatric patients. The study included two groups: an experimental group comprising 30 patients (16 females and 14 males) with maxillary skeletal transverse deficiency who required rapid maxillary expansion (RME), and a control group consisting of patients (10 females and 10 males) who did not require RME or orthodontic treatment. Frontal and profile photographs were taken before and after RME for both groups. Frontal photographs were used to obtain 12 linear measurements, while profile photographs were used to perform 2 linear and 2 angular measurements using the "protractor" and "pixel ruler" software. Burstone-Legan, Steiner and Rickett's analyses were performed to determine the locations of the upper and lower lips. Student t-test, paired samples t-test and Mann-Whitney U test were used to evaluate the data. In the experimental group, there was a statistically significant increase in nose width and intercommissural distance at the end of the treatment (p < 0.05). Similarly, both the experimental and control groups showed a statistically significant increase in the dorsum of nose length at T2 compared to the initial measurement (p < 0.05). Furthermore, the male participants in the experimental group exhibited a statistically significantly higher increase in nose length and dorsum of the nose during the T1 and T2 periods compared to the female participants in the experimental group (p < 0.05). RME may lead to changes in soft tissues in pediatric patients and was observed to be gender-specific. However, these changes were not clinically noticeable, and long-term follow-up studies are needed to determine the long-term effects of these changes.

Medium-term effects of rapid maxillary expansion on nasal cavity and pharyngeal airway volumes considering age as a factor: A retrospective study.

OBJECTIVES: The medium-term effects of rapid maxillary expansion (RME) on nasal cavity (NC) and upper airway (UA) dimensions based on chronological age are still unclear. This retrospective study evaluated the medium-term changes occurring in the NC and pharyngeal airways (PA) after RME in two distinct age-based cohorts of patients. METHODS: This retrospective study included 48 subjects who underwent RME grouped in two cohorts: a 6-9-year-old group (EEG group: early expansion group - 25 subjects) and an 11-14-year-old group (LEG group: late expansion group - 23 subjects). NC and PA volumes were analyzed from CBCT imaging segmentation before RME (T0) and twelve months after RME (T1). The amount of maxillary expansion (PW) and minimal cross-sectional area (CSmin) were also considered. RESULTS: All PAs' volumetric sub-regions, CSmin and PW showed a significant volumetric increment (p < 0.05). Inter-group comparisons showed significant differences (p < 0.05) for nasopharynx and CSmin parameters (p < 0.05), while no significant changes were recorded for the other UA's sub-regions and PW (p > 0.05). According to a deviation analysis, part of the UA increase (more marked for the nasopharynx area) may have occurred due to reduced adenotonsillar tissues, which were larger in the EEG group. CONCLUSIONS: Twelve months after treatment, clinicians should not expect changes in the UAs dimensions to be solely related to treatment effects of RME; instead, normal craniofacial growth changes and spontaneous regression of the adenotonsillar tissue could represent the most significant factors influencing UAs changes. CLINICAL SIGNIFICANCE: From the clinical perspective, the results of the present study encourage caution when considering the therapeutic effects of RME on airways dimensions.

Transient bacteremia following the removal of four different types of rapid palatal expanders.

PURPOSE: General health related recommendations for prophylactic measures in connection with orthodontic treatments are limited due to the lack of evidence-based data. This study aimed to investigate the development of transient bacteremia following the removal of four types of rapid palatal expanders (RPE). METHODS: Seventy-five individuals aged 10-18 years undergoing rapid palatal expansion with four types of RPE were categorized according to the type of RPE used in their treatment: banded tooth-borne (group A (1), n = 17), banded tooth- and tissue-borne (group A (2), n = 17), bonded tooth-borne (group B (1), n = 18), and bonded tooth- and tissue-borne (group B (2), n = 23). Gingival inflammation was assessed using the gingival index one day before RPE removal. Furthermore, samples of blood (5 ml each) were collected before and 3 min after RPE removal. The groups were statistically evaluated for comparability with respect to sex, age, or wear time of the RPE and to the gingival index. In addition, the prevalence of bacteremia in the different groups was evaluated and statistically compared. RESULTS: No significant difference was found among the groups (p > 0.05) for sex, age, and RPE wear time. Mean gingival index was higher in group B (2) than in group A (1) (p < 0.05). The prevalence of bacteremia did not differ significantly between groups. Streptococcus species were identified in all bacteremia cases. The bacteremia prevalence of the groups was as follows: group A (1), 11.8%; group A (2), 23.5%; group B (1), 16.7%; and group B (2), 30.4%. CONCLUSION: This investigation demonstrated that removal of a RPE could cause bacteremia, but the RPE design did not affect the prevalence of bacteremia. The results of this study support the necessity of prophylaxis measures before RPE removal in indicated patients.

The Complexity of Skeletal Transverse Dimension: From Diagnosis, Management, and Treatment Strategies to the Application of Collaborative Cross (CC) Mouse Model.

This study investigates the significance of skeletal transverse dimension (STD) in orthodontic therapy and its impact on occlusal relationships. The primary goal is to enhance understanding and promote the integration of transverse skeletal diagnostics into routine orthodontic assessments. To achieve this aim, the study employs a comprehensive approach, utilizing model analysis, clinical assessments, radiographic measurements, and occlusograms. The initial step involves a meticulous assessment of deficiencies in the maxilla, mainly focusing on transverse dimension issues. Various successful diagnostic methods are employed to ascertain the type and presence of these deficiencies. Furthermore, the study compares surgically assisted maxillary expansion (SARME) and orthopedic maxillary expansion (OME) in addressing skeletal transverse issues. Stability assessments and efficacy analyses are conducted to provide valuable insights into the superiority of SARME over OME. The findings reveal that proper evaluation of STD is crucial in orthodontic diagnosis, as overlooking transverse dimension issues can lead to complications such as increased masticatory muscle activity, occlusal interferences, and an elevated risk of gingival recession. Surgically assisted maxillary expansion emerges as a more stable solution than orthopedic methods. In conclusion, incorporating skeletal transverse diagnostics into routine orthodontic assessments is imperative for achieving optimal occlusal relationships and minimizing negative consequences on dentition, periodontium, and joints. The study emphasizes the significance of accurate three-dimensional assessments and recommends the consideration of SARME over OME for addressing skeletal transverse deficiencies. Finally, the Collaborative Cross (CC) mouse model is also a novel mouse model for studying complex traits. Exploring the Collaborative Cross mouse model opens avenues for future research, promising further insights into transverse skeletal issues in orthodontics.

The effect of vertical skeletal proportions, skeletal maturation, and age on midpalatal suture maturation: a CBCT-based study.

BACKGROUND: Midpalatal suture (MPS) maturation may be influenced by a range of parameters including age, gender, and vertical skeletal pattern. We therefore aimed to evaluate the effect of Frankfurt-mandibular angle (FMA), skeletal maturation, and age on the timing of MPS maturation. METHODS: In this cross-sectional study, cone-beam computed tomography (CBCT) and lateral cephalograms were used to assess the MPS and cervical vertebral maturation (CVM) stage. A proportional odds logistic regression model was used to assess associations between age adjusted for gender and MPS maturation, and a regression analysis was performed to analyze the effect of vertical pattern on these associations. RESULTS: A total of 201 patients (84 male and 117 female) with a mean age of 13.48 (SD 1.94) were included. With increasing age, the odds of belonging to a higher maturation stage increased (OR: 2.14; 95% CI 1.789; 2.567; P < 0.001); however, no association between FMA and MPS maturation was observed (OR: 1.01; 95% CI 0.964; 1.051; P = 0.76). A strong correlation between MPS maturation and CVM stage was not reported. Males had a higher probability of belonging to a lower MPS maturation stage (OR: 0.24; 95% CI 0.136; 0.415; P < 0.001). CONCLUSIONS: Based on this cross-sectional analysis, midpalatal sutural maturation classification is associated with chronological age and occurs later in males. Neither CVM staging nor variation in vertical skeletal proportions were useful predictors of midpalatal maturation stage.

Comparison of Mechanical Behavior of Clear Aligner and Rapid Palatal Expander on Transverse Plane: An In Vitro Study.

(1) Background: This study aims to investigate, within a controlled laboratory environment, the magnitude of the transversal load and the force decay over time produced by clear aligners in comparison to a Rapid Palatal Expander (RPE). (2) Methods: Resin models of a dental maxillary arch, additively manufactured from an intraoral scan, were inserted in a testing machine with uniaxial load cells to measure the force trend over time expressed by RPE and clear aligners. The mechanical load was recorded during a certain timeframe for both appliances. (3) Results: The force expressed by the RPE ranged from 30 to 50 N for each activation, decreasing with a nonlinear pattern over time. The force expressed by the clear aligner ranged from 3 to 5 N, decreasing with a linear pattern over time. In contrast, the force generated by the clear aligner fell within the range of 3 to 5 N, showing a linear reduction in force magnitude over the observed period of time. (4) Conclusions: The RPE exerted a force magnitude approximately ten times greater than that generated by clear aligners. Nevertheless, it is essential to acknowledge that the oral environment can significantly influence these results. These limitations underscore the need for caution when applying these findings to clinical settings.

Short- and Long-Term Effects of Maxillary Expander with Tongue Crib in Growing Open-Bite and Skeletal Class II Patients: A Retrospective Study.

The purpose of this study was to evaluate short- and long-term changes in growing patients with Class II malocclusion and open bite after rapid maxillary expansion (RME). A retrospective cohort study was conducted with 16 growing patients with open-bite malocclusion enrolled in a group treated with a rapid maxillary expander (RME) with a crib (TG), and 16 untreated patients with similar malocclusion in the control group (CG). Cephalograms were recorded before starting the treatment (T0), at the end of the latency phase (T1), and before the fixed therapy (T2) in order to analyze skeletal and dental changes in vertical, transversal, and sagittal relationships. Statistical analysis was performed with α = 0.05 as level of significance. At the end of the active expansion (T1), all subjects in the TG showed a corrected overbite with a statistically significant difference compared to the CG (p > 0.05). A significant decrease in jaw divergence was found in the TG compared to the CG (p < 0.05). At T2, all treated patients maintained a correct overbite. Statistical analysis revealed a significant decrease in maxillary, mandibular, and intermaxillary divergence in the TG compared to the CG (p < 0.05). This protocol could be effective in growing open-bite patients, showing a long-term decrease in facial divergence. The fixed crib allowed to normalize myofunctional activity.

Fat mass and obesity-associated protein (FTO) affects midpalatal suture bone remodeling during rapid maxillary expansion.

BACKGROUND: The fat mass and obesity-associated protein (FTO) is an RNA demethylase that contributes to several physiological processes. Nonetheless, the impact of FTO on bone remodeling in the midpalatal suture while undergoing rapid maxillary expansion (RME) remains unclear. METHODS: First, to explore the expression of FTO in the midpalatal suture during RME, six rats were randomly divided into two groups: Expansion group and Sham group (springs without being activated). Then, suture mesenchymal stem cells (SuSCs) were isolated as in vitro model. The expression of FTO was knocked down by small interfering RNA to study the effect of FTO on the osteogenic differentiation of SuSCs. Finally, to evaluate the function of FTO in the process of bone remodeling in the midpalatal suture, ten rats were randomly divided into two groups: FB23-2 group (10 µM, a small molecule inhibitor of FTO) and DMSO group (control). RESULTS: Increased arch width and higher expression of OCN and FTO in the midpalatal area were observed in expansion group (P < .05). In the in vitro model, the mRNA expression levels of Runx2, Bmp2, Col1a1, Spp1, and Tnfrsf11b were decreased (P < .05) upon knocking down FTO. Additionally, the protein levels of RUNX2 and OPN were also decreased (P < 0.05). Adding FB23-2, a small-molecule inhibitor targeting FTO, to the medium of SuSCs caused a decrease in the mRNA expression levels of Runx2, Bmp2, Col1a1, Spp1, and Tnfrsf11b (P < 0.05). There was a statistically significant difference in evaluating the expression of OCN and OPN on the palatal suture between the FB23-2 and DMSO groups (P < .05). LIMITATION: The molecular mechanisms by which FTO regulates SuSCs osteogenesis remain to be elucidated. The FTO conditional knock out mouse model can be established to further elucidate the role of FTO during RME. CONCLUSION: FTO contributes to the osteogenic differentiation of SuSCs and plays a promoting role in midpalatal suture bone remodeling during the RME.

Facial soft tissue changes and volumetric analysis of upper airways in patients undergoing surgically assisted rapid maxillary expansion using a transpalatal distractor.

OBJECTIVE: To verify changes in facial soft tissue using the RadiANT-DICOM-viewer and Dolphin Imaging software, through linear measurements of tomographic points in a 3D reconstruction of the face and volumetric evaluation with three-dimensional measurements of the upper airways of patients with transverse maxillary discrepancy undergoing Surgically Assisted Rapid Maxillary Expansion (SARME). METHODS: Retrospective, transverse, and descriptive study, through the analysis of computed tomography scans of the face of patients with transverse maxillary discrepancy, treated from July 2019 to December 2022. The sample consisted of 15 patients of both sexes, aged 21-42 years old, who underwent surgically assisted rapid maxillary expansion using the transpalatal distractor. Analysis was performed through linear, angular, and three-dimensional measurements in millimeters, in the preoperative and late four-month postoperative period, in frontal 3D tomographic images of the face, in the region of the width of the nose and alar base and also angular measurement in the lateral tomography for the angle nasolabial and upper airways of rhinopharynx, oropharynx and hypopharynx. RESULTS: There was an increase in nasal width with an average of 1.3467mm and an increase in the alar base with an average of 1.7333mm. A significant difference was found in the pre- and postoperative assessments of the measurements of nasal width, alar base and nasolabial angle, as well as the upper airways in all their extension. The results favour a better understanding of the professional and the patient regarding the diagnosis and management of patients with transverse maxillary width discrepancies. CONCLUSION: Although our study shows an increase in soft tissues after SARME, no aesthetic changes are observed clinically, and all patients report significant respiratory improvement. SARME may therefore contribute to the improvement of professionals working in the field of oral and maxillofacial surgery and orthodontics. LEVEL OF EVIDENCE: Level 4.

Mini-Implant Insertion Using a Guide Manufactured with Computer-Aided Design and Computer-Aided Manufacturing in an Adolescent Patient Suffering from Tooth Eruption Disturbance.

Due to dental diseases, anatomical restrictions, and mixed dentition, the reduction in the number of teeth and the displacement of tooth germs pose challenges in orthodontic treatment, limiting anchorage options. The presented case demonstrates an advanced treatment solution using digital CAD/CAM-technologies and medical imaging for the creation of a mini-implant template. A 12-year-old male patient experiencing delayed tooth eruption, multiple impacted germs, and maxillary constriction underwent intraoral scanning and CBCT. Utilizing coDiagnostiXTM Version 10.2 software, the acquired data were merged to determine the mini-implant placement and to design the template. The template was then manufactured through stereolithography using surgical-guide material. Mini-implants were inserted using the produced appliance, enabling safe insertion by avoiding vital structures. Surgically exposed displaced teeth were aligned using a Hyrax screw appliance anchored on the mini-implants for rapid palatal expansion (RPE) and subsequently used as fixed orthodontics to align impacted teeth. The screw was activated daily for 10 weeks, resulting in a 7 mm posterior and 5 mm anterior maxillary transversal increase. Skeletal anchorage facilitated simultaneous RPE and tooth alignment, ensuring accuracy, patient safety, and appliance stability. The presented case shows a scenario in which computer-aided navigation for mini-implant positioning can enhance precision and versatility in challenging anatomical cases.

The influence of orthopedic rapid maxillary expansion on the deviation of the nasal septum.

Nasal septal deviation (NSD) is one of the most common abnormalities impacting the maxillofacial development of children. Herein, we investigated the impact of orthopedic rapid maxillary expansion (RME) on the nasomaxillary complex and NSD in pediatric patients. The study sample consisted of a total of 40 patients divided into two groups. The experimental group included 26 patients (13 females and 13 males) with skeletal maxillary transversal constriction and NSD greater than 1 mm, while the control group comprised 14 patients (6 females and 8 males) with skeletal maxillary transversal constriction but no NSD. All the patients were treated for approximately 15 days with the tooth-tissue born RME device. The activation procedure was to turn the transversal Hyrax screw a quarter turn, twice a day. After that, the device was left in place for a period of five months to facilitate passive retention. Radiographic analysis was performed on posteroanterior (PA) cephalometric radiographs taken at pre-expansion (T1) and post-expansion (T2). The data were evaluated using the Mann-Whitney U and Wilcoxon Sign tests. The experimental group showed a statistically significant decrease (p < 0.05) in the distance from the axis of symmetry to middle of nasal septum (SNM-mid) and to inferior part of the nasal septum (SNI-mid) measurements, indicating a reduction in NSD. Additionally, both experimental and control groups showed a statistically significant increase (p < 0.05) in maxillofacial measurements, including the distance between the nose length (X-SNM and SNM-SNAC), width of the nasal cavity (Pir L-R), basal maxillary width (Mx L-R), vestibular cuspid of upper first molars (CVM + L-R) and lower first molars (CVM-L-R). Based on the study findings, RME was considered effective in achieving craniofacial improvement in pediatric patients with NSD, which positively impacted their healthy growth and development. The improvement in the nasomaxillary complex was similar between genders.

Effects of rapid maxillary expansion on sleep disturbance scale for children: A longitudinal CASE-series study.

OBJECTIVE: To evaluate the effects of rapid maxillary expansion (RME) on Sleep Disturbance Scale for Children (SDSC) with maxillary atresia. MATERIALS AND METHODS: The sample consisted of 27 paediatric patients evaluated through a Brazilian version of the SDSC, answered by their guardians at the following experimental time points: T0 (before installing the Hyrax expander), T1 (on the day of expander stabilization), T2 (3 months after expander stabilization), T3 (immediately after expander removal, following 6 months of retention), and T4 (3 months post-retention). Multilevel Poisson analysis adjusted for repeated measures was performed to compare outcomes across the assessment time points. RESULTS: The mean age of patients was 9.1 years (SD = 1.46). The total SDSC scores decreased and were statistically significant from T2 onwards (P < .01), with a decrease of 24% at T4 compared with T1 (IRR 0.76; 95% CI 0.69-0.84). The mean scores at T4 were already lower than the cutoff point for risk of sleep disorders. Regarding the specific domains, there was a significant reduction in sleep breathing disorders, sleep-wake transition disorders, and disorders of excessive somnolence as of T2 (P < .01), T3 (P < .05) and T4 (P < .05), respectively. CONCLUSION: RME in children with maxillary atresia had a positive effect on the reduction of total SDSC scores after 3 months of expander stabilization, sustained over 6 and 9 months and significant reduction in sleep breathing disorders domain, sleep-wake transition disorders domain, and disorders of excessive somnolence domain over time points.

Age-related changes in the midpalatal suture: Comparison between CBCT staging and bone micromorphology.

The age-related maturation of the human midpalatal suture is challenging to predict, but critical for successful non-surgical rapid maxillary expansion (RME). While cone-beam computed tomography (CBCT) can be used to categorize the suture into stages, it remains unclear how well the stages predict the actual micromorphology of the palate. To address this clinically relevant question, we used CBCT together with three-dimensional micro-computed tomography (µCT) analysis on 24 human palate specimens from individuals aged 14-34 years. We first classified the specimens into stages (A-E) using CBCT images and then correlated the results with our comprehensive µCT analysis. Our analysis focused on several factors, including bone volume fraction (BV/TV), sutural width, volume, interdigitation, ossification, and their associations with age, CBCT stage, and sex. Our µCT analysis revealed a decrease in sutural width and volume after the age of 20 years, accompanied by sutural closure beginning in the palatal segment. The overall rate of ossification remained low but increased after the age of 20 years. No significant differences were found between males and females. Importantly, we also found no correlation between individual age and CBCT stages. Furthermore, there was no association between CBCT stages and patalal suture volume, ossification and interdigitation. Taken together, our findings cast doubt on the reliability of CBCT stage as a means of predicting skeletal maturity of the palatal suture, as it appears to lack the precision required to accurately assess the true micromorphology of the palatal suture. Future investigations should explore whether alternative CBCT parameters may be more useful in addressing the challenging question of whether RME requires surgical bone weakening.

Effects of different distractor positions on the formation of expansion, stress and displacement patterns in surgically assisted rapid maxillary expansion without pterygomaxillary disjunction: a finite element analysis study.

Skeletal orthopedic expansion of maxilla is accepted as a reliable method for the treatment of transverse maxillar deficiency in growing patients. The aim of the study was to evaluate the effects of different palatal distractor positions on the expansion, stress and displacement patterns of the structures of craniofacial complex in surgical assisted rapid maxillary expansion without pterygomaxillary disjunction (PTMD) with the help of finite element analysis(FEA). Four facial skeleton models with different distractor positions (first premolar, second premolar, first molar, second molar regions) were created. In all finite element models median and lateral osteotomies were performed, without PTMD. Stress distribution was evaluated after 5 mm activation of the transpalatal distraction in all models using the nonlinear solution method in FEA. Unilateral displacement(mm) and stress distribution(MPa) were measured in three directions (x, y, and z axes) of craniofacial and maxillofacial structures in the symmetrical finite element models. In all models, the unilateral transverse displacements of the anterior teeth were greater than those of the posterior teeth, and the greatest displacement was at the central incisor level. The greatest displacement values at the central incisor level, at the anterior nasal spine(ANS) and at the posterior nasal spine(PNS) levels was measured in Model-IV, III, II and I, respectively. Mean elemental stress(von Mises stress) in the medial pterygoid plate, screw and lateral pterygoid plate regions from highest to lowest was measured in Model-IV, III, II and I, respectively. The maxilla performed outward rotation and tipping movement in all models during the expansion period. Among the distractor positions, the second molar region was found to be the most advantageous one in terms of expansion pattern. Considering the patient's anatomy and clinical conditions, placing the palatal distractor as posteriorly as possible will result in more effective maxillary expansion.

Can rapid maxillary expansion affect speech sound production in growing patients? A systematic review.

Rapid maxillary expansion (RME) may change speech sound parameters due to the enlargement of oral and nasal cavities. This study aimed to systematically review the current evidence on speech changes as a side effect of RME. An electronic search was conducted in nine databases, and two of them accessed the 'grey literature'. The eligibility criteria included clinical studies assessing orthodontic patients with maxillary transverse deficiency and the relationship with speech alterations without restricting publication year or language. Only interventional studies were included. The JBI Critical Appraisal Tool assessed the risk of bias. The initial search provided 4853 studies. Seven articles (n = 200 patients) met the inclusion criteria and were analysed. The primary source of bias was the absence of a control group in four studies. RME altered speech production by changing vowel fundamental frequency and fricative phoneme formant frequency. Shimmer and jitter rates changed in one and two studies, respectively. Two studies presented deterioration during orthodontic treatment, but speech improved after appliance removal. Despite the limited evidence, RME affects speech during and after treatment.

Analysis of maxillary asymmetry before and after treatment of functional posterior cross-bite: a retrospective study using 3D imaging system and deviation analysis.

BACKGROUND: Previous evidence would suggest that subjects affected by functional posterior cross-bite (FPXB) present an asymmetric morphology of the maxilla. However, no evidence is available concerning the morphology (symmetry/asymmetry) of the maxilla after treatment of FPXB. This study aimed to investigate the volumetric and morphological changes of the palate in FPXB subjects treated with maxillary expansion and to compare these data with an untreated control group. The study sample included 20 FPXB subjects (mean age 8.1 ± 0.9 years) who underwent maxillary expansion (MEG group) and 21 FPXB subjects (mean age 7.7 ± 1.2 years) as controls (CG group). Digital models were recorded at T0 (first observation) and T1 (12-18 months after first observation) and analyzed to assess palatal volume and symmetry. Deviation analysis and percentage matching calculation were also performed between original and mirrored palatal models for each patient. All data were statistically analyzed for intra-timing, inter-timing and inter-groups assessments. RESULTS: At T0, the cross-bite side (CBS) was significantly smaller than non-cross-bite side (non-CBS) in both groups (p < 0.05). At T1, the CBS/non-CBS difference reduced significantly in the MEG group (p < 0.05) while slightly worsened in the CG, however without statistical significance (p > 0.05). The matching percentage of the palatal models improved significantly at T1 in the MEG group (T0 = 74.02% ± 9.8; T1 = 89.95% ± 7.12) (p < 0.05) while no significant differences were recorded in the CG (T0 = 76.36 ± 8.64; 72.18% ± 9.65) (p > 0.05). LIMITATIONS: The small sample size and the retrospective design of the study represent two limitations that should be overcome with further clinical trials. CONCLUSIONS: Subjects with FPXB present an asymmetric development of the maxillary vault that improves after reestablishment of normal occlusion following maxillary expansion.